Grease Line Jetting in Houston, TX
Houston Quality Hood Cleaning jets the grease out of Houston kitchen drain lines: the branch lines from the sinks, the line into your grease trap and the line out of it. High-pressure water scours hardened grease off the pipe walls instead of just poking a hole through it, so drains run full again. We quote the job before we start and pump the trap afterward, so the loosened grease doesn't stay in your system.
Houston Quality Hood Cleaning provides grease line jetting in Houston, TX and surrounding Houston, TX cities, including Katy, Sugar Land, Pearland, Pasadena, Bellaire, Humble, Spring and Cypress.
Get a FREE Quote.
Why Houston Kitchens Call Us About Their Traps
Grease Line Jetting Services
Kitchen Branch Lines
The pipes from the dish pit, prep sinks and floor drains to the trap carry the most grease, and they clog first.
Photo: Tracy Hunter, Wikimedia Commons
Trap Inlet Lines
When the trap has room but the kitchen backs up, the inlet line is usually the culprit.
Photo: Hannah Clover, Wikimedia Commons
Trap Outlet Lines
Grease that got past a broken baffle or a missing tee hardens downstream. Jetting clears it, and fixing the trap stops it from happening again.
Scheduled Maintenance Jetting
High-volume kitchens can schedule jetting alongside pump-outs, before the line gets bad enough to back up.
Backups During Service
A stopped line in the middle of service is an emergency. See emergency grease trap pumping.
Photo: Simcitywok, Wikimedia Commons
Fatberg Removal
Grease, wipes and food solids can combine into a solid mass. Jetting breaks it up so it can be flushed and removed.
Photo: Lord Belbury, Wikimedia Commons
Jetting vs Snaking a Grease Line
A drain snake (cable machine) bores a hole through the blockage. The drain runs again, but most of the grease stays stuck to the pipe walls, and the line closes up again, often within weeks.
A jetter sends water at high pressure through a nozzle that sprays backward and forward. It scrubs the grease off the full circumference of the pipe and pushes it downstream to where it can be removed. For grease, jetting is usually the more thorough fix.
Snaking still has a place, for solid objects like a dropped utensil or a rag. We'll tell you which one your line needs.
Signs a Grease Line Needs Jetting
Slow drains that come back shortly after the trap is pumped.
Gurgling in floor drains when the dish machine empties.
Water rising in floor drains while the sinks empty.
Odors from floor drains even with a clean trap.
Snaking that works for a week, then fails again.
Older buildings with years of grease in the lines.
How Often?
It depends on the kitchen. Some lines go years without trouble. Busy kitchens with long pipe runs or older pipes may need it on a regular schedule, timed with their pump-outs. We'll recommend an interval from what we find, not a fixed sales schedule.
How a Grease Line Jetting Job Works
1. Find the Access
Jetting goes in through a cleanout, the capped access point on the drain line. We locate the cleanouts before the work starts. If there isn't one where we need it, we'll tell you.
2. Look First
If the line has a recurring problem, a camera inspection shows where the grease is and whether the pipe itself is damaged.
3. Jet the Line
We work the nozzle through the line and flush the loosened grease toward the trap or the outlet.
4. Pump the Trap
Jetting sends grease into the trap. We pump it out afterward, so the grease doesn't sit there, and you get a manifest.
5. Test It
We run water through the fixtures to confirm they drain freely.
Is Jetting Safe for My Pipes?
For sound pipes, yes. The pressure and nozzle are matched to the pipe's size and material. Older buildings are where we're careful:
Old cast iron
can be scaled, thin or cracked. Jetting cleans it, but it can also reveal how worn it is.
Cracked or offset joints
can let water out under pressure. A camera look first shows whether the line can take it.
Roots and collapsed sections
in outdoor lines aren't a grease problem. They need a plumber.
If we see signs that a line is damaged, we stop and tell you before going further.
Keeping the Lines Clear Longer
Keep the trap on schedule. A full trap pushes grease into the outlet line.
Fix broken baffles and missing tees so grease can't get past the trap.
Keep strainers in every drain and scrape plates into the trash.
Never pour fryer oil down a drain, even a little at a time.
Book maintenance jetting with your pump-outs if your lines clog often.
Your Line or the City's?
The drain lines inside your building, the trap and the private sewer line out to the city's connection are generally the property's responsibility. The public sewer main belongs to the city.
If neighboring businesses are backing up at the same time, or water rises from a cleanout near the street, the blockage may be in the public main. Report that to the City of Houston through 311 before paying anyone to jet a line that isn't yours.
In shared buildings, check the lease to see who handles common drain lines.
What Grease Line Jetting Costs
Jetting is quoted per job. The price depends on how many lines need work, their length and access, how heavy the buildup is, whether a camera inspection is needed and whether it's a scheduled or emergency call. Pumping the trap afterward is listed separately on the same itemized quote.
Drains Clogging Again? Clear the Line for Real
Tell us which drains are slow and when the trap was last pumped. We'll quote the jetting and the pump-out together.